咨询热线

13905418708

仿石，顾名思义是一种仿造天然石材的人造材料，而应用于路侧石的仿石必须具备符合要求的石材特性。仿石人造石主要有两种类型：有机人造石和无机人造石。一般来说，室外应用要求更高，通常采用无机人造石，其特点有类的外观并能达到相应技术要求的石材特性。因路侧石一般应用于道路的隔断围护，需适应冷热交替或者夏季雨水和冬季冰冻的路面，较冷地区还要考虑耐盐冻，因此路侧石的应用就要求具有较高的密度，强度和较小的吸水率等要求。因有机材料胶凝固化一般是冷-热树脂，只能应用于室内。所以目前只有无机材料的仿石人造石材质才能适合于室外应用。

Imitation stone, as the name suggests, is an artificial material that imitates natural stone, and the imitation stone used in roadside stones must have the required stone characteristics. There are two main types of imitation stone artificial stones: organic artificial stones and inorganic artificial stones. Generally speaking, outdoor applications require higher requirements, usually using inorganic artificial stones, which have a natural appearance and can meet the corresponding technical requirements of stone characteristics. Due to the fact that curbstones are generally used for road partition and enclosure, they need to adapt to cold and hot alternations, summer rainwater, and winter freezing road surfaces. In colder areas, salt frost resistance should also be considered. Therefore, the application of curbstones requires high density, strength, and low water absorption. Due to the fact that organic materials are generally cured by cold hot resins, they can only be applied indoors. So currently, only inorganic materials such as imitation stone and artificial stone materials can be suitable for outdoor applications.

每年城镇道路建设需要大量的路侧石，目前市场上应用的路侧石也绝大部分是天然石，在资源综合利用政策的严控之下，矿山开采不断减少，天然石的积极利用率也越来越高，造成了路侧石这种普通公共材料供应困难，有些地方一石难求。而仿石路侧石可以利用矿山尾渣，建筑废料再加工利用生产，不但可以问题而且可以创造不同的经济价值，同时也能为践行绿水青山做贡献。

Every year, urban road construction requires a large amount of roadside stones, and the vast majority of roadside stones currently used in the market are natural stones. Under the strict control of resource comprehensive utilization policies, mining is continuously decreasing, and the active utilization rate of natural stones is also increasing. This has caused difficulties in the supply of roadside stones, a common public material, and in some places, it is difficult to obtain one stone. Imitation stone roadside stones can be produced by utilizing mining tailings and building waste for further processing and utilization. This not only solves environmental problems but also creates different economic values, while also contributing to the practice of green mountains and clear waters.

采用湿法真空负压高压加压成型生产工艺，生产过程采用PC控制，动作由伺服驱动，生产过程自动化高。生产制品密度高，生产过程稳定，仿真性强，生产线设计采用多工位全闭环自动线工艺，具有成品率高等特点。机器更换模具也可生产规格范围内的板材，支持分层布料，二次布料，内置钢筋等辅助选择性功能。

The production process adopts a wet vacuum negative pressure high-pressure compression molding process, which is controlled by PC and driven by servo, resulting in high automation of the production process. The production density of products is high, the production process is stable, and the simulation is strong. The production line design adopts a multi station fully closed loop automatic line process, which has the characteristics of high yield. Machine replacement of molds can also produce boards within the specified range, supporting layered fabric, secondary fabric, built-in steel bars and other auxiliary selective functions.

本文由山东仿石路沿石提供技术支持，更多的详细精彩内容请点击我们的网站http://www.longyuejiancai.com ，我们将会全心全意为您提供满意的服务。

This article is provided with technical support by Shandong Fangshi Roadside Stone. For more detailed and exciting content, please click on our website http://www.longyuejiancai.com We will wholeheartedly provide you with satisfactory service.